How to maintain the computerized jacquard loom


Release time:

2023-03-30

Computerized jacquard looms require careful cleaning and cleaning to ensure the cleanliness of the parts. Especially for some parts with rotating and swinging fittings, they should be cleaned carefully.

How to maintain the computerized jacquard loom? Computerized jacquard looms require careful cleaning and cleaning to ensure the cleanliness of the parts. Especially for some parts with rotating and swinging fittings, they should be cleaned carefully. If some assembly parts are not cleaned cleanly, the temperature rise is too high and the transmission force is too heavy, which will affect the performance of the machine, and if it is serious, it will accelerate the wear and tear. In short, we must pay attention to cleaning and cleaning.
After the computerized jacquard loom is assembled or overhauled, the impact on the equipment will be relatively large. If your computerized jacquard loom is of poor quality, it will result in poor performance, short life, loud noise, etc. If the assembly does not meet the specified technical requirements, the computerized jacquard loom cannot work normally. The mutual position between parts and mechanisms is not correct, which also affects the working performance of computerized jacquard loom.
On the contrary, for some parts that are not very accurate, after careful selection, assembly and accurate adjustment, equipment with better performance can still be assembled.
Precautions for use
1. Before using the computerized jacquard loom, it must be cleaned.
2. When the power supply specifications are different, do not press the red power switch to start the computerized jacquard loom, let it work, so as not to burn the computer box and report a fee.
3. Confirm whether the set voltage is correct and whether the power plug is inserted correctly.